Valve is recommended for use in an irrigation system driven by city water
Indexing valve can run from 2 to 4 zones based on the chosen cam configuration
Manual or automatic operation
2, 3 and 4 zone cams included
Pipe size 1 in.
4 outlets
Recommended for flow rates of 10 to 25 GPM
10 PSI minimum pressure rating
Anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation
Great alternative to individual solenoid valves
1 above ground valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
1 valve can replace up to (4) 1 in. solenoids
Only use standard clear PVC cement (not included) when installing the valve and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and never the valve housing